Niedner Snowmaking Hose
NIEDNER SNOW HOSE™ 2000
Niedner Snowmaking Hose is designed specially for snowmaking. SNOW HOSE 2000™ is a 100% polyester double jacket hose, able to handle the high pumping pressure and harsh conditions found at your mountain. SNOW HOSE 2000™ comes with a standard high visibility yellow ENCAP™ treatment for added safety and abrasion resistance. Niedner Snowmaking Hose is 
flexbile to -60°F (-51°C), and the tight weave of the outer jacket resists cutting and punctures.
When it comes to safety, durability, performance, and value, Niedner sets the standard in snowmaking hose. Couple this with Annecy's personalized service and maniacal commitment to the snow business and you simply can't go wrong.
Niedner Snow Hose Standard Lengths: 50' and 100' (15,2 and 30,5 m).
SNOW HOSE™ 2000 specifications
- Niedner Snow Hose shall be of double jacket construction with 100% virgin spun polyester yarn in both jackets.
- There shall also be a minimum of 11.0 filler yarns per inch in both the inner and outer jackets of Niedner Snow Hose.
- The thickness of the lining shall be 0.020" (508 µm) minimum and it shall be constructed of extruded T.P.U. elastomer.
- The outside jacket shall be treated with yellow ENCAP elastomer, which shall completely encapsulate the jacket fibers and not merely surface coat the jacket.
- The Niedner Snow Hose service temperature range shall be -60°F to 140°F (-51°C to 60°C).
- FM abrasion test of 30,000 cycles minimum and Taber abrasion test of 5,000 cycles minimum.
- At 800 PSIG (5600 kPa), its elongation shall not exceed 8% of the initial hose length, it shall not warp more than 20 inches (51 cm) and should not rise from the test table.
- Niedner Snow Hose shall not twist more than 1½ turns per 50 ft (15,2 m) while at 800 PSIG (5600 kPa).
- Minimum service test pressure of 400 PSIG (2800 kPa).
- Minimum proof test pressure of 800 PSIG (5600 kPa).
- The Niedner Snow Hose while curved to a radius of 27" (69 cm) shall not burst at less than 1600 PSIG (11200 kPa).
- Niedner Snow Hose meets or exceeds NFPA 1961 specifications.
